Driveways in Essex take a particular kind of punishment. The wet climate means moss and algae establish themselves quickly, especially on north-facing or shaded areas. Oil from parked cars works its way into porous surfaces like concrete and block paving. Tyre marks build up at the turning point. Weeds push through joints. The whole surface goes from the clean, defined look it had when it was laid to something that just looks tired and neglected gradually, then all at once.

The frustrating part is that most of it isn’t permanent damage. It’s surface contamination that the right cleaning process lifts completely. A lot of driveways that look like they need relaying just need cleaning properly, with the right equipment and the right products applied in the right order.

Here’s what we include in every driveway clean:

• Biocide and degreaser pre-treatment — applied to the surface before pressure washing begins, targeting moss, algae, oil, and embedded grime at the source. This is the step most operators skip. We don’t
• Commercial rotary surface cleaning — engine-driven pressure washing with a rotary head that cleans evenly across the full surface without stripe marks or patchy results
• Weed and joint clearance — growth between slabs and joints cleared out properly, not just sprayed over
• Targeted stain treatment — oil spots, rust marks, tyre staining dealt with individually using the appropriate specialist product
• Final rinse and full inspection — we go over the whole area before we pack up, and if something needs another pass it gets one
• Optional sealing — a professional-grade sealant applied after cleaning that closes the surface pores, resists future staining, and slows moss and algae regrowth significantly